Sewage Treatment Plant

Services offered in Mechanical Screen

Mechanical Screen

Screening is an essential part of the sewage treatment process without it the waste would go unfiltered and cause clogging and congestion.

Mechanical screen features

Use detect big solid substances, maintain sewage infrastructure.
Screw screen use removing big solid wastes
drum screen use removing sticky solids.
Other variants auto abrasive bar mesh, versatile filter
Other wastes removed big stones, pulpy content, tiny particles, oil, sand, fiber.
Operating temperatures -15 to 50 C
Authorized and certified yes
Size 1-6mm
Handling waste flow 1-500litres / second.

Some types of mechanical screens are discussed below

THE INCLINED BLOCK RAKE SCREEN
Uses eliminates rough solids
Maintenance low

The screens can be taken off via rake screens, which have rails at the base, capable of trapping bottles and wood.

THE AUTO BASKET SCREEN
Configured in pump and lift posts
Uses prevents cluttering of pumps, screen filters.
Top filter size 8-15mm
Width 900mm
Frame material stainless steel grade 316
Motor powers 0.37-1 KW
Power phases used 3
Voltage 380 V, 50HZ. The at which you will need to
Screen angle configuring 90 degrees.

The basket captures waste like rock solids to tissue papers, without getting stuck when compared to the wire rack which is dependent on the rake

THE UPRIGHT BAR SCREEN
Uses access difficult area
Positioning standing upright
Height rack 1500mm
Accessible depth 10 meters
Top filter size 10-25mm
Width 500-2000mm
Motor power 1-2KW

Rake assists in grabbing the waste and shifting it to the machine’s top, the shovel later takes off the waste to the hopper that finally ends up in the dump container

THE STEP INCLINED SCREEN
Suited for water bay constructions
Screen configuring angle 55 degrees
Filtration 3-6mm
Noise less
Frame material stainless steel

The waste is gathered via a chain and disposed.

Let’s get started

Tell us about your requirements and we will get back to you as soon as possible.

Send us a message

-->